Panasonic KX-NCP500 Networking Manual page 44

4.2.3 Programming the Network Settings
When "En-bloc" is selected, you need to press "#" after dialing the phone number.
*1
Programming for the Extension Number Method
44 IP Networking Guide
7. a.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
b.
Click INS.
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the small PBX image
for virtual slots.
c.
Click Select Shelf.
d.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
e.
Click Port Property.
Confirm that all ports are in service (INS).
Note
When a V-IPGW16 card is installed, 8 ports (1–8)
are available. When two V-IPGW16 cards are
installed, 16 ports (1–16) are available.
2. a.
From the system menu, click CO & Incoming Call.
b.
Click CO Line Settings.
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP CO lines.
d.
Click OK.
Document Version 2010-08