Panasonic KX-NCP500 Networking Manual page 62

4.5.1 Assigning the IP Addressing Information
KX-NT321
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address
Select "Default GW".
To enter the IP address of the MPR card in the Primary PBX
(PBX IP Address)
Press HOLD to return
to the Menu screen.
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
Select "Secondary
PBX".
Continued on next page
62 IP Networking Guide
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
Select "PBX". Press SP-PHONE.
PBX IP Address
PBX IP Address
Press SP-PHONE.
Press SP-PHONE
twice.
2
3
Select "PBX IP Press SP-PHONE.
Address".
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Document Version 2010-08