Panasonic KX-NCP500 Networking Manual page 81

KX-NT265 (software version 2.00 or later only)
To start programming
Press PROGRAM while
"Searching" is displayed.
To set the DS field value
Press VOLUME to
select "DS (Enable)".
To end programming
HOLD
Press HOLD to return
to the Menu screen.
Document Version 2010-08
Press VOLUME to Press SP-PHONE.
select "QoS".
Diffserv
0.0–7.7
Press SP-PHONE.
The IP-PT will reboot
registered to the PBX.
Press STORE.
4.5.3 Setting the Diffserv Parameters
Press VOLUME to
select "Diffserv".
Press SP-PHONE.
and can then be
Press SP-PHONE.
IP Networking Guide 81