Panasonic KX-NCP500 Networking Manual page 72

4.5.1 Assigning the IP Addressing Information
KX-NT265
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Press VOLUME to
select "Network".
IP Address*
To set the subnet mask address
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
Press VOLUME to
select "Default GW".
To enter the IP address of the IP-EXT16 card (PBX IP Address)
HOLD
Press HOLD
twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
72 IP Networking Guide
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
1
Press SP-PHONE.
Subnet Mask Address*
Press SP-PHONE.
Default Gateway Address*
Press SP-PHONE.
Press VOLUME Press SP-PHONE
to select "PBX". twice.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE
twice.
2
Press SP-PHONE.
3
Press SP-PHONE.
PBX IP
Address
Press
SP-PHONE.
Document Version 2010-08
HOLD
Press HOLD
to return to the
Menu screen.