Panasonic KX-NCP500 Networking Manual page 63

Continued from previous page
Press HOLD twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT's power off,
and (2) hold the STORE button and 2 key while turning the power on.
Document Version 2010-08
The IP-PT will reboot
and can then be
registered to the PBX.
4.5.1 Assigning the IP Addressing Information
IP Networking Guide 63