Streamer And The Phone Adapter - oticon INTIGA Manual

Accepting phone calls while watching TV
An incoming call either mobile or from the Phone Adapter
will be indicated by a ringing sound. When the phone call is
finished, Streamer will automatically return to the TV
output.
Note: The Connect function on Streamer must be
activated to allow transmission from the TV. If not active,
it automatically turns on when starting the TV listening.
Deactivating the Connect function must be done
manually on the Connect button.
72 OTICOn InTIGA FITTInG GUIDE

Streamer and the Phone Adapter

(For installation of the Phone Adapter refer to the
Installation Guide and Genie Instruction Videos.)
Pairing
1. Assure that Streamer's key lock is deactivated.
2. Press Streamer Connect button for 6 seconds until the
blue light starts flashing rapidly.
3. Press the red Phone button on the Phone Adapter for
6 seconds until the red status indicator flashes.
4. Within 30 seconds the Phone Adapter connects to
Streamer and pairing is complete.
5. The red status indicator of the Phone Adapter gives
constant red light.
6. The blue light in Streamer Connect button gives
constant light for 6 seconds and then shows slow
fading light.
Pairing is done only once and will normally not have to
be repeated.
Daily Use
Phone calls with Streamer
Wear Streamer around the neck with the neck strap, and
make sure that the Connect function is active:
Streamer must be within 10 meters of the Phone Adapter
and the red status indicator on the Phone Adapter must be
constantly lit.
Incoming calls
A ringing sound is heard in the hearing instruments and
the green rim light around the Phone button flashes.
Answer
Press and release Streamer's Phone button. Streamer
answers the call and the green rim light will switch to
constant light.
73