Streamer And The Phone Adapter - oticon Acto Complete Manual

Accepting phone calls while watching TV
An incoming call either mobile or from the Phone Adapter will
be indicated by a ringing indicator. When the phone call is over
Streamer will return to the TV sound.
Note: The Connect function on Streamer must be activated
to allow transmission from the TV. If not active, it automati-
cally turns on when starting the TV listening. Deactivating
the Connect function must be done manually on the Connect
button.
84 OticOn ActO FITTING GUIDE

Streamer and the Phone Adapter

(For installation of the Phone Adapter refer to the Installation
Guide and Genie Instruction Videos).
Pairing
1. Assure that Streamer's key lock is deactivated.
2. Press Streamer Connect button for 5 seconds until the blue
light starts flashing rapidly.
3. Press the red Phone button on the Phone Adapter for
5 seconds until the red status indicator flashes.
4. Within half a minute the Phone Adapter connects to
Streamer and pairing is complete.
5. The red status indicator of the Phone Adapter gives
constant red light.
6. The blue light in Streamer Connect button gives constant
light for 5 seconds and then shows slow fading light.
Pairing is done only once and will normally not have to
be repeated.
Daily Use
Phone calls with Streamer
Wear Streamer around the neck in the neck strap, and make
sure that the Connect function is active:
Streamer must be within 10 meters of the Phone Adapter
and the red status indicator on the Phone Adapter must show
constant light.
Incoming calls
A ringing tune is heard in the hearing instruments and
the green rim light around the Phone button flashes.
Answer
Press Streamer's Phone button shortly. Streamer answers
the call and the green rim light will switch to constant light.
85