Pairing The Streamer To The Phone Adapter - oticon Phone 2.0 Instructions For Use Manual

pairing the Streamer to the phone adapter

The very first time your Streamer is used with the phone adapter, the Streamer
must be paired to the phone adapter.
For pairing:
1. Make sure the phone adapter is powered on, i.e. the power indicator is steady green.
2. Press the on/off button on the Streamer Pro (A) or the connect button on the
Streamer (B) for 5-6 seconds
3. Place the Streamer on top of the phone adapter – the pairing takes around
20–60 seconds.
4. The pairing is completed when the power indicator on the phone adapter and the
on/off button on the Streamer turns steady blue. Pairing is done only once and will
normally not have to be repeated.
until the blue light starts blinking.
18