Attaching Tool-Less Slide-Rail Assemblies; Installing The Server Into The Slide-Rail Assemblies - Sun Microsystems Sun Fire X4450 Installation Manual

8. If available, extend the anti-tip foot at the bottom of the rack. (See .)
FIGURE 2-5
Extending the Anti-tip Foot
FIGURE 2-5
Caution – If your rack does not have an anti-tip foot, the rack could tip over.

Attaching Tool-less Slide-Rail Assemblies

To attach tool-less slide-rail assemblies to the rack, refer to the installation card
included with the kit.
Installing the Server Into the Slide-Rail
Assemblies
Use this procedure to install the server chassis, with mounting-brackets, into the
slide-rail assemblies that are mounted to the rack.
Caution – This procedure requires a minimum of two
people because of the weight of the server. Attempting this
procedure alone could result in equipment damage or
personal injury.
Chapter 2 Installing the Sun Fire X4450 Server Into a Rack with Slide-Rails 17