Setting Up The Sun Fire X4450 Server; Connecting The Cables; Connector Locations - Sun Microsystems Sun Fire X4450 Installation Manual

3
C H A P T E R

Setting Up the Sun Fire X4450 Server

This chapter describes how to connect cables and power up the Sun Fire X4450
server for the first time. It includes the following topics:
"Connecting the Cables" on page 27
■
"Service Processor Overview" on page 30
■
"Connecting to the LOM Service Processor for the First Time" on page 33
■
"Determining the LOM Service Processor IP Address" on page 34
■
"Applying Power for the First Time" on page 41
■

Connecting the Cables

Connect the power and data cables to the server back panel.

Connector Locations

See
FIGURE 3-1
and for the locations of the back panel connectors
TABLE 3-1
.
27