Delivery Methods; How To Start A Remote Console Session - Sun Microsystems Sun Fire X4450 Installation Manual

Delivery Methods

By default, video output for the Windows preinstall is directed to the VGA monitor.
If no VGA monitor is attached, use a Remote Console session to configure the OS.

How to start a Remote Console Session

For more detailed information on starting a Remote Console session, refer to.
ELOM: See section "Starting the Remote Console Application" in the Embedded Lights out
Manager Guide for the Sun Fire X4150 and X4450 Servers.
ILOM: See the Sun Integrated Lights Out Manager Users Guide.
Note – If a VGA monitor is attached, skip this section
1. Determine the Service Processor IP address.
See
Refer to the Embedded Lights Out Manager (ELOM) Administration Guide or Sun
Integrated Lights Out Manager Users Guide for detailed information.
2. Open a browser window.
3. Type the IP address of SP into a browser window, and then login to the web
interface.
4. Click on the Remote Control tab, and then select Redirection.
5. Click Launch.
The console appears.
56 Sun Fire X4450 Server Installation Guide • July 2008
"Determining the LOM Service Processor IP Address" on page 34.