Storagetek Card - Sun Microsystems Sun Fire X4450 Installation Manual

7. Because HDD0 contains data, select merge or delete:
Choose M to merge data and start a sync operation.
■
Choose D to erase the Windows Server 2003 R2 PreInstall.
■
8. Press C to create the RAID and start the sync operation.
9. Click Exit to save the configuration and close the menu.
10. Press Esc to exit the configuration utility and reboot.
Creating a RAID Set to Incorporate a Preinstalled
OS Using the Sun StorageTek Card
The Sun StorageTek card allows you to choose from many RAID configurations.
How you configure your system depends on your system requirements and the
available hard disk drives in the system. The following example shows how to
mirror the preinstalled Windows Server 2003 R2 OS. This is the better option, and all
remaining disks (should there be more than 2) are incorporated into a DATA RAID
set using the available options as shown in
You will need the Sun Fire X4450 Server Tools and Drivers CD.
Follow these steps to mirror your configured Windows Server 2003 R2 OS:
1. Select Start and then Sun Link - Online Information.
2. Select Install Supplemental Software.
3. Check Sun StorageTEK Manager.
4. Click Next to install the Sun StorageTek Manager program.
5. Select Start and then Sun StorageTek Raid Manager.
6. Double-click the local machine that displays by the IP Address of the Primary
ENET connection.
A prompt appears.
7. At the prompt, log in as root, using the OS password that was assigned during
installation.
8. Click the SUN STK RAID Controller.
All attached hard disk drives on Enclosure 0 and 1 appear.
9. To mirror the OS, right-click Logical Device 1 and then choose Expand or
Change Logical Device.
Chapter 5 Configuring the Preinstalled Windows Server 2003 R2 Operating System
.
TABLE 5-2
61