Installing The Sun Fire X4450 Server Into A Rack With Slide-Rails; Before You Install - Sun Microsystems Sun Fire X4450 Installation Manual

2
C H A P T E R
Installing the Sun Fire X4450 Server
Into a Rack with Slide-Rails
This chapter describes how to place the Sun Fire X4450 server into a rack using the
rail assembly in the rackmount kit. Perform this procedure if the rail assembly is
purchased.
This chapter includes the following topics:
"Before You Install" on page 9
■
"Checking Compatibility" on page 10
■
"Disassembling Slide-Rails" on page 11
■
"Installing the Mounting-Brackets Onto the Server" on page 13
■
"Attaching the Slide-Rail Assemblies to the Rack" on page 14
■
"Installing the Server Into the Slide-Rail Assemblies" on page 17
■
"Installing the Cable Management Arm" on page 20
■
"Verifying Operation of the Slide-rails and CMA" on page 26
■
Note – In this guide, the term rack means either an open rack or a closed cabinet.

Before You Install

Read the overview and see the service label on the top cover before you begin to
install the Sun Fire X4450 server.
9