Configuring The Solaris Os - Sun Microsystems Sun Fire X4450 Installation Manual

Installation Worksheet
TABLE 4-1
Installation Information
Time zone
Root password

Configuring the Solaris OS

To configure the preinstalled Solaris OS:
1. Log in to the service processor as an administrator. For example:
Login: root
Password: changeme
2. Start the LOM console.
ELOM:
a. Type: cd /SP/AgentInfo
Description
Select one of the following routes:
• Specify IP address. An /etc/defaultrouter file is created with the
specified IP address. When the system is rebooted, the specified IP
address becomes the default route.
• Detect IP address. Let the Solaris installation program detect an IP
address. However, the system must be on a subnet that has a router
that advertises itself by using the ICMP router discovery protocol. If
you are using the command-line interface, the software detects an IP
address when the system is booted.
• None. Select None if you do not have a router or do not want the
software to detect an IP address at this time. The software
automatically tries to detect an IP address on reboot.
How do you want to specify your default
time zone?
Choose a root password for the system.
Chapter 4 Configuring the Preinstalled Solaris 10 Operating System
Enter System Configuration:
Asterisk (*) indicates default.
Geographic region*
Offset from GM
Time zone file
47