Installation
[3]
[1]
5
You have to detach the PTZ mechanism from the
upper housing to plug the cable connector.
To detach PTZ mechanism, press down and hold
against both sides of the black handles on the
PTZ mechanism.
6
[1] Wind the waterproof tape around the pipe of
the upper housing.
[2] Hook the safety wire to the hole of the safety
cable hanger.
[3] Attach the upper housing to wall mount
bracket by turning it at least seven times.
[2]
To secure the upper body orientation, turn
the handle of double nuts clockwise until it is
tight.
11