Digital Watchdog PTZ39X User Manual page 36

OSD -
CAMERA SETUP > AE SETUP
1
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
DAY/NIGHT
MOTION
SHUTTER SPD
SENS-UP
BACK
EXIT
2
DAY/NIGHT
- - - - - - - - - - - - - - - - - - - - - - - - - - -
-BURST
[ DAY NIGHT ]
-BRIGHTNESS
-DWELL TIME
[ NIGHT DAY ]
-BRIGHTNESS
-DWELL TIME
-MASK AREA
BACK
EXIT
1
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
BACK
EXIT
2
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
- WEIGHT
- WDR LEVEL
- WHITE BAL
BACK
EXIT
The camera automatically detects the change by the
<ALC>
brightness of the scene.
<AUTO>
F.FAST
- - - BURST
AUTOx4
If BURST is set to ON, the burst signal is produced although the
camera is hcange to B/W filter.
BRIGHTNESS
As the camera switches from Color to B/W with BRIGHTNESS set as
LOW, the images will appear darker. As the camera switches from B/W
to Color with BRIGHTNESS set as HIGH, the image will appear brighter.
Press
Near/Enter
DWELL TIME
Key
When the switching criterions are satisfied, the filter is changed after
the status is maintained during the dwell time.
OFF
MASK AREA
MIDDLE
If the streetlights or traffic lights are present in a night scene, the
5 SEC
mode might not change to B/W. In this incident, setting MASK AREA
MIDDLE
to those lights will correct the problem.
5 SEC
1 2
In WDR mode, the brightness is adjusted in all area of the
<ALC>
picture by combining high speed shutter and low speed
0
OFF
shutter.
WEIGHT
If WEIGHT goes to HIGH, the area applying high speed shutter is
expanded.
WDR LEVEL
If WDR LEVEL goes up, the speed of the high speed shutter becomes
faster.
Joystick Down
WHITE BAL
If WHITE BAL is set to INDOOR, the color temperature adjusts
based on the darker areas. If WHITE BAL is set to OUTDOOR, the
color temperature adjusts based on the brighter areas.
<ALC>
0
WDR
MIDDLE
0
INDOOR
DAY/NIGHT
2
ON / OFF
LOW / MIDDLE / HIGH
2 SEC / 3 SEC / 5 SEC / 10 SEC / 15 SEC /
20 SEC / 25 SEC / 30 SEC
1 / 2
If BACKLIGHT is set to BLC, MASK AREA function is deactivated.
2 AE SETUP - IRIS > ALC > BACKLIGHT > WDR
LOW / MIDDLE / HIGH
-9 ~ +9
INDOOR / OUTDOOR
When WDR is used, the internally operating VPS function stops.
36