OSD -
FUNCTION SETUP > GROUP SETUP
6
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[
CANCEL
[
7
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[NEAR:EDIT ACT]
CANCEL
[FAR :EDIT END]
8
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
1
00:03 1
:MOVE CURSOR]
: CHANGE VAL.]
Press
Near/Enter
Key
1
00:03 1
Press
Far Key
1
00:03 1
EDIT GROUP - Selects Function Sequence
7
When you finish setting up an ACTION, press Near or Enter key.
Move cursor up/down to select another ACTION NO. and
repeat to step 4 ~ step 6 to edit the selected group.
4
6
EDIT GROUP - Saves the Setting
8
After completing the setup of all ations, press Far key to exit.
Then move the cursor to SAVE. Press Near or Enter key to
save the data.
31