Table of Contents
Advertisement
Installation -
Disassemble the camera
1. For the installation, remove the dome using the wrench
included with the camera to loosen the three (3) screws on
the base of the dome. Remove the protection film between
the dome and the camera module.
2. Using the mounting template sheet or the camera itself,
mark and drill the necessary holes in the mounting surface.
Resetting the camera: With the camera ON, press
the reset button for five (5) seconds to initiate a
camera-wide reset of all the settings, including network
settings.
Reset Button
8
Advertisement
Table of Contents
Need help?
Do you have a question about the MEGApix Ai DWC-XSDA05Bi and is the answer not in the manual?