INSTALLATION *
E
D
B
C
A
6
1. Separate the Dome Cover [A] from
the Bottom Case [B].
2. Cut a hole in the ceiling for routing
the cables.
3. Align the camera unit with the surface
of the ceiling and make two marks for
where the screws will be. Drill holes
for the two marks.
4. Pass the Power Cable [D] and Video
Cable [E] through the cable hole in
the ceiling.
5. Match the two holes of the Bottom
Case [B] with the two drilled holes in
the ceiling and then fix the Bottom
Case [B] in place by tightening the
Two Screws [C].
6. Adjust the lens and camera settings.
7. Fix the Dome Cover [A] back to the
Bottom Case [B].
LENS ADJUSTMENT *
A
C
B
1. Separate the Dome Cover [A] from the Bottom Case [B].
2. Loosen the Lens Bracket [C] with a screw driver.
3. Adjust the camera lens to the desired position and then fix the lens to the
desired spot by tightening the Lens Bracket [C] with a screw driver.
4. Assemble the Dome Cover [A] with the Bottom Case [B].
68.8
7