Safety Information
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject
to excessive vibration or magnetic interference.
2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C),
or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn o the power and then move
or reinstall it.
4. Remove the power plug from the outlet when there is a lightning. Neglecting to do so may cause
fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as the sun, for this may
damage the CCD image sensor.
8. The camera shall not be exposed to dripping or splashing, and no objects filled with liquids, such as
vases, shall be placed on the camera.
9. The main plug used to disconnect the device shall stay readily operable at any time.
3