Table of Contents
Advertisement
Installation -
Installation
1. For the installation process, remove the four (4) fixed screws on
the side of the camera and remove the top cover. Use a Phillips
screwdriver (not included).
2. Using the camera itself, mark and drill the necessary holes in the
wall by the door being monitored. The camera requires four (4)
mounting holes and an additional hold for the cable. The camera
should be mounted at 4.3feet (approximately 1.3 meter) between
the bottom of the camera and the floor.
Product Floor
Reset Button
Resetting the camera: Press the reset button for five (5)
seconds to initiate a camera-wide reset of all the settings,
including network settings.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the MEGApix DWC-MHS5W37T and is the answer not in the manual?