Table of Contents
Advertisement
OSD -
CAMERA SETUP > AE SETUP
1
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
DAY/NIGHT
MOTION
SHUTTER SPD
SENS-UP
BACK
EXIT
2
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
BACK
EXIT
3
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS
- IRIS LEVEL
- BACKLIGHT
- AREA
BACK
EXIT
4
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
MOVE TO TARGET POSITION
[ENTER : SELECT]
5
BLC AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[
ADJUST MASK WIDTH]
[
ADJUST MASK HEIGTH]
[ENTER : SELECT]
1
IRIS
<ALC>
<AUTO>
See below
F.FAST
- - -
DAY/NIGHT
AUTOx4
Color filter or B/W filter can be selected. If DAY/NIGHT is set to <AUTO>,
the DAY/NIGHT editing screen will appear. See the next page
2
Press Near/Enter Key
AGC
Enhances the brightness of the image by amplifying gain when the
illumination is low.
<ALC>
MOTION
0
If MOTION is set as S.SLOW, the shutter speed will be slower to
OFF
obtain more light. There will be less noise but this can cause
the ghost effect of the moving object.
If MOTION is set towards F.FAST, there will be more noise but this
will reduce the ghost effect for any moving object.
SHUTTER SPD
If this speed is faster, the moving object can be photographed
without the ghost effect. However, the images can be dark if the
Select BACKLIGHT > BLC,
scene lacks sufficient lighting.
Press Near/Enter Key
SENS-UP
<ALC>
0
Activates the slow shutter function when the luminance of image
BLC
is too dark for the CCD to accumulate the amount of light it is set
CENTER
to obtain.
2
If ALC is selected, the iris will be controlled automatically.
Select AREA > USER,
IRIS LEVEL
Press Near/Enter Key
BACKLIGHT
This function improves the backlight effect, which is when the
subject is dark on the monitor because the intensive backlight
- BLC: You can select the desired area you wish to brighten. If it
- WDR: See
3
Move Camera to BLC Area,
Press Near/Enter Key
AREA
If set to USER, the user can set the specific area.
See screen
AE SETUP
ALC / MANUAL
AE SETUP - IRIS > ALC
2
DAY / NIGHT / AUTO
DAY/NIGHT.
This is changed to AGC or MOTION according to the SENS-UP
setting.
VERY LOW / LOW / MIDDLE / HIGH /
VERY HIGH / USER 1~16 / FIX 1~16
S.SLOW / SLOW / NORMAL / FAST / F.FAST
OFF
/
If SENS-UP is set to AUTO, SHUTTER SPD is deactivated.
OFF / AUTO x2 ~ AUTO x256 /
FIX x2 ~ FIX x256
AE SETUP - IRIS > ALC
-32 ~ +32
OFF / BLC / WDR
is set on a bright area, note that the area will appear even more
brighter.
AE SETUP-IRIS > ALC > BACKLIGHT > WDR on the next
2
page.
BLC AREA
TOP / BOTTOM / LEFT / RIGHT / USER
4 5
on this page.
35
1/100 ~ 1/10K
Advertisement
Table of Contents
