Table of Contents
Advertisement
Rev 1.8
Installing the Switch in the Rack
Tools and Customer Supplied Parts
• Phillips Screwdrivers #1 and #2
• ESD strap
• ESD mat
Bracket
Rail
Rail slide
Make sure that the Rail kit is compatible with your rack.
For short depth switches, rail kit # MIS00083 is to be used for racks from 50cm to 80cm deep,
and rail kit # MIS00079 is to be used for racks from 38cm to 50cm deep including the iDataPlex
rack.
For standard depth switches rail kit # MIS00085 is to be used for racks from 60cm to 80cm deep.
Parts included in the rail kit:
• 2 rails
• 2 rail slides
• 2 brackets
12
Mellanox Technologies
• Grounding screw
• Grounding wire sufficient to reach a valid ground.
Figure 1: Rack Rail Kit Parts MIS00083/85
• 18 recessed flat head screws
• 8 caged nuts
• 8 pan head screws M6
Hide quick links:
Advertisement
Table of Contents
