Torque Values; Power Supply Requirements; Environmental Requirements; Recommended Torque Values By Screw Size - Enterasys Matrix N7 7C107 Hardware Installation Manual

Power Supply Requirements

A.1.1

Torque Values

The following table describes the recommended torque values to use when installing the N7
chassis using standard threaded fastener machine screws and bolts.
Table A-1 Recommended Torque Values by Screw Size
Screw Size
English
N/A
2 – 56
4 – 40
6 – 32
8 – 32
10 – 32
1/4 – 20
A.2 POWER SUPPLY REQUIREMENTS
The requirements for the 6C207-3 ac power supply modules are as follows:
Accepts up to (2) 6C207-3 power supplies.
Each 6C207-3 power supply accepts (2) IEC320 C13 power cord plugs.
Input Frequency:
Input: (Voltage/Current):
Input Power:
A.3

ENVIRONMENTAL REQUIREMENTS

Operating Temperature:
Storage Temperature:
Operating Relative Humidity:
A-2 Specifications and Regulatory Compliance
Metric -%5
N/A 1.42
1.5 2.85
2.5 4.75
3.5 8.55
4.5 17.10
5 30.40
6.5 63.65
50 to 60 Hz
2 x 100 to 125 Vac: 12 A
2 x 200 to 240 Vac: 6 A
1600 W
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 90% (non-condensing)
Torque in Pounds
Nominal
1.5
3.0
5.0
9.0
18.0 18.90
32.0 33.60
67.0 70.35
Bit Size
+%5
1.57 0
3.15 0
5.25 0/1
9.45 1
2
2
3