Appendix A Loading Images Using The Tftp Server - iDirect iNFINITI 3000 Installation And Commissioning Manual

Appendix A Loading Images using the TFTP Server

An alternate method of loading the images is to use the TFTP server that comes bundled with
iSite.
1. Open iSite and from the File menu select TFTP.
2. A pop up window will prompt you to the TFTP server local folder. Browse and
select the folder in which the remote package resides.
3. Open a console session to the iNFINITI unit and login to the Linux prompt as
root.
4. Type "service idirect_falcon stop". This will stop the application.
5. Type "tftp_package.sh <IP address of TFTP server> <package name>".
For example, if your laptop's IP address is 10.10.1.2 and you are loading 6.0.3
remote package the command will be "tftp_package.sh 10.10.1.2 remote
6_0_3.pkg".
6. Once the transfer is complete, reset the unit using the "reboot" command.
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
59