Remote Duties - iDirect iNFINITI 3000 Installation And Commissioning Manual

12.2 Remote Duties

After the Network Help Desk has made any necessary adjustments to the Satellite Router's
configuration, you should record some baseline readings for local reference, in case the antenna
is moved, or some other service issue arises.
Use the following procedure to record the baseline readings.
1. Open a HyperTerminal session to the Satellite Router's console. Alternatively,
you may telnet to it.
2.
Record the:
a. Receive SNR of the Satellite Router(> 10.0 dB Clear Sky Conditions).
b. Transmit power of the Satellite Router.
c. Receive composite power into the Satellite Router. (-60 to –5 dBm).
d. Temperature reading in Celsius.
Example: Remote Status Message
RemoteStatus: t:000017435715 SNR=15.60 RxPower=-33.79
dBmTxPower=-15.00 dBm DigitalRxPower=21.07 Temp=49.1
TDM_Lost=0FllDac = 1812 LAN Port: 10 Mbps Half Duplex
(AutoNegotiation: None)
These readings should be checked periodically to ensure that the service is not degrading. These
readings will be monitored from the Network Help Desk. Heavy weather or sandstorms can cause
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
46