Set The Clear Sky C/N Parameters For A Mesh Remote - iDirect iNFINITI 3000 Installation And Commissioning Manual

13.3 Set the Clear Sky C/N Parameters for a Mesh Remote

If you are commissioning a mesh remote, follow these steps to set the values for
and for
C/N TDMA Loopback Clear Sky C/N
to fade during network operation.
1. In iMonitor, right-click the remote in the network tree and select
the menu.
2. Click the
Remote Status
.
C/N [D/B]
3. In iBuilder, right-click the remote in the network tree and select
the menu.
4. On the
Information
5. In
SCPC Clear Sky C/N
6. In
TDMA Loopback Clear Sky C/N
from iMonitor.
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
. These parameters will help to diagnose issues related
tab and record the values for
tab, ensure that
Mesh Enabled
, enter the value recorded for
, enter the value recorded for
54
Control Panel
and
Down C/N [dB]
Modify Item
is selected.
from iMonitor.
Down C/N [dB]
TDMA LB C/N [dB]
SCPC Clear Sky
from
TDMA LB
from