8
Fine-tune the Antenna Pointing and Cross Polarization
Complete fine-tuning the antenna pointing and cross polarization from within the iSite GUI.
8.1
Set up the Satellite Router for Cross Polarization
1.
Disable the power to the Satellite Router to set it up for cross polarization.
2.
Disconnect the receive IFL cable from the Satellite Router.
3.
Disconnect the transmit IFL cable from the DVM and connect it to the BUC.
8.2
Set up iSite for Cross Polarization
The remote portion of the cross polarization test is conducted from the iSite GUI.
1.
Power on the Satellite Router and ensure that you have IP connectivity to it
from your laptop.
2.
Launch iSite and connect to the Satellite Router using its IP address
3.
Log in as Admin with a valid password.
4.
In the iSite main menu, select Configure, select Align Antenna, and then
click Cross Polarization.
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
Figure 8-1: iSite Cross Polarization
35