Table of Contents
Advertisement
7
Point the Antenna Using a Voltmeter on the Transmit IFL Cable
This section describes pointing the antenna using Pulse Width Modulation and iSite. An
alternative pointing method is described in the Appendix B of this document.
7.1
Prepare the IDU (Indoor Unit) and ODU (Outdoor Unit) for Pointing
1.
If your Satellite Router is powered on, power it off at this time.
2.
Ensure that the Receive IFL cable is connected from the LNB to the Satellite
Router.
3.
Ensure that the Transmit IFL cable is connected to the Satellite Router.
4.
Disconnect the Transmit IFL cable from the BUC and connect it to the Digital
Volt Meter
5.
Power on your Satellite Router.
7.2
Log in to Your Satellite Router
1.
After powering on your Satellite Router, you should still have IP connectivity.
In iSite, select your remote in the iSite Tree View, right-click on it, and then
select Login.
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
27
Hide quick links:
Advertisement
Table of Contents
