5.
In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following
IP address, and then enter an IP address that is inside the range specified by the
Satellite Router's IP address and subnet mask.
6.
Enter the same subnet mask that you retrieved from the Satellite Router using the
"laninfo" command. For the purposes of a local connection, you do not need to
specify DNS server addresses.
7.
Enter the Satellite Router's IP address as the Default Gateway address
8.
Click OK to save your changes.
You should now be able to connect to the Satellite Router using the iSite GUI.
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
12