iDirect iNFINITI 3000 Installation And Commissioning Manual page 56

NOTE
4. In iMonitor, right-click the remote in the network tree and select
from the menu. Then select the
UCP
5. Select the
Remote Status
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
If you are commissioning the first remote on a mesh inroute, you
must determine and set
at this time. Do not continue with this procedure until you have set
that parameter. For details, see
Line Card, Private Hub or Mini Hub
System iBuilder User Guide.
Remote Status
tab and observe the column
52
for the mesh inroute
TDMA Clear Sky C/N
Chapter 14, Commissioning a
in the Network Management
Remote Status/
tab.
.
Tx Pwr [dBm]