Table of Contents
Advertisement
Chapter 6
ConnectUPS-X Web/SNMP Card
Avaya
Additional UPS Features
This section describes:
S
ConnectUPS-X Web/SNMP Card
S
The Alarm Adapter
S
Network transient protector
S
Load segments
The ConnectUPS-X Web/SNMP Card is a network device for your UPS
that provides both SNMP and HTTP compatibility. It has a built-in
switching hub that allows three additional network devices to be
connected to the network without the requirement of additional network
drops.
With the ConnectUPS-X card, you can monitor the UPS several different
ways:
S
Using a Web browser such as Microsoft
and manage the connected UPS
S
Using your Internet-ready cell phone or PDA (personal digital
assistant)
S
Using SNMP-compatible network management software
(user-supplied) that monitors the UPS in a method similar to that of
other network devices
Refer to the Powerware ConnectUPS Web/SNMP Card User's Guide on
the Software Suite CD for more information.
10 Mb Network LEDs
(yellow)
100 Mb
Network
LEDs
(green)
Additional Ethernet Connectors
Figure 22. ConnectUPS-X Panel Details
t
S9RM UPS Site Preparation, Installation and Operator's Manual
Internet Explorer to monitor
R
Uplink Ethernet Connector
Power LED (green)
Off
On
1 2
COM Port
Reset Button
S
05147387 Rev C
Status LED (yellow)
DIP Switch
43
Advertisement
Table of Contents
