Exiting Serial Pass-Through Mode - Avaya S9RM Installation And Operator's Manual

CONFIGURATION
13. Click Apply to save the change. The Update ERM Configuration
14. Confirm the change by clicking Yes. The update completes, and the
15. Click Exit.

Exiting Serial Pass-Through Mode

After using the card in Serial Pass-Through mode, restart the card in
Normal mode:
1.
2.
3.
42 t
Avaya S9RM UPS Site Preparation, Installation and Operator's Manual
screen opens.
ERM Options screen opens again.
Disconnect the configuration cable from the card and PC.
Return the card's switches to the original settings noted in Step 1
on page 40.
Using a pen or paperclip, press the RESET switch on the
ConnectUPS-X Web/SNMP Card to restart the card in Normal
mode.
S
05147387 Rev C