Operation; Turning The Ups On; Starting The Ups On Battery - Avaya S9RM Installation And Operator's Manual

Chapter 4

Turning the UPS On

Starting the UPS on Battery

Avaya

Operation

This section describes:
S
Turning the UPS on and off
S
Starting the UPS on battery
S
Initiating the self-test
S
Operating modes
After the UPS is connected to a power outlet, it conducts a self-test and
enters Standby mode.
To turn on the UPS, press the On button on the front panel. The
indicator illuminates solid and the bar graph indicators display the
percentage of load being applied to the UPS.
To turn on the UPS without using utility power, press and hold the
On button for at least four seconds. The UPS starts up in Battery mode
and supplies battery power to your equipment. When the UPS starts on
battery, it does not conduct a self-test to conserve battery power.
t
S9RM UPS Site Preparation, Installation and Operator's Manual
μ
S 31
05147387 Rev C