Chapter 9
Audible Alarms and UPS Conditions
Battery Service
Test/Alarm
Reset Button
Avaya
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Service and support
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 11 to determine and resolve the UPS alarms and
conditions.
NOTE Some alarms, such as the Overtemperature and Overload alarms, must be cleared by
shutting down and restarting the UPS (see page 62 for more information).
Site Wiring Fault
Self-Test
Figure 31. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 11).
To silence the alarm for an existing fault, press the
status changes, the alarm beeps, overriding the previous alarm silencing.
t
S9RM UPS Site Preparation, Installation and Operator's Manual
Overtemperature
Overload
Indicator Legend
Unlit
Lit
Flashing
button. If UPS
S
05147387 Rev C
59