Ups Setup - Avaya RS9 Installation And Operator's Manual

Installation Setup

UPS Setup

The Avaya RS9 UPS is shipped in a carton on a shipping pallet. Power
and battery modules are shipped in separate boxes on another pallet.
NOTE Do not attempt to lift the cabinet by the module shelves or other convenient
edges or panels.
Do NOT lower the casters or attempt to move the cabinet with the power or battery
modules installed.
1. Lower the four cabinet casters (one at each corner of the
2. With all casters fully extended, carefully roll the cabinet down
3. Turn all four caster bolts counter-clockwise until the cabinet
NOTE If the floor is uneven and the cabinet is tilted or unstable, you may need to
place a thin steel plate under a corner. Do not use the caster bolts to level the
cabinet.
If you ordered an optional battery cabinet (either EBMC or EBC
A through F), continue to "Battery Cabinet Installation" on page 19.
If you do not have a battery cabinet, continue to "Electrical Installation"
on page 11 to hardwire the UPS.
8
Avayat RS9 UPS (9–18 kVA, 9-Slot Models) Site Preparation, Installation and Operator's Manual
C A U T I O N
cabinet base) by using a 1/2 I hex-style socket wrench to turn
each bolt clockwise.
the ramp and to its intended operating location.
rests on the floor. Place a plastic cap into each bolt access hole.
S
164201543 Rev A