NetModule NB2700 User Manual page 90

You can use TFTP, HTTP, HTTPS and FTP URLs, specifying a username/password
or a port is not yet supported. Please note that config updates expect a zip-file named
<serial-number>.zip in the specified directory.
Listing 5.6: Getting the configuration update status:
snmpget v 3 u snmpadmin
snmpadmin 1 9 2 . 1 6 8 . 1 . 1
The return value can be one of: succeeded (1), failed (2), inprogress (3), notstarted
(4).
snmpset v 3 u admin
admin01admin01 1 9 2 . 1 6 8 . 1 . 1
"http :// server / directory "
Listing 5.8: Getting the software update status:
snmpget v 3 u snmpadmin
snmpadmin 1 9 2 . 1 6 8 . 1 . 1
The return value can be one of: succeeded (1), failed (2), inprogress (3), notstarted
(4).
The following parameters can be used to set up the SNMP agent:
SNMP agent status: Enable or disable the SNMP agent
Listening Port: SNMP agent port
Community: An SNMP community string corresponding to the group that devices and
management stations running SNMP belong to
Contact: System maintainer/contact information
Location: Location of the device
Trap target host: The host where the traps will be sent to
Trap target port: The port where the traps will be sent to
Signal strength trap threshold: A trap will be sent, if signal strength falls below this
threshold.
Signal strength trap reactivation threshold: No further traps will be sent as long as
signal strength his not higher than this value.
Attention must be paid to the fact that SNMP passwords have to be more than 8
characters long. Shorter passwords will be doubled for SNMP (e.g. admin01 becomes
admin01admin01).
NB2700 User Manual
n "" l authNoPriv
1 . 3 . 6 . 1 . 4 . 1 . 3 1 4 9 6 . 1 0 . 4 0 . 1 2 . 0
Listing 5.7: Running a software update:
n "" l authNoPriv
1 . 3 . 6 . 1 . 4 . 1 . 3 1 4 9 6 . 1 0 . 4 0 . 1 3 . 0 s
n "" l authNoPriv
1 . 3 . 6 . 1 . 4 . 1 . 3 1 4 9 6 . 1 0 . 4 0 . 1 4 . 0
90
a MD5 x DES
a MD5 x DES A
a MD5 x DES
A
A