Openvpn Configuration - NetModule NB2700 User Manual

NB2700 User Manual
Figure 5.25.: OpenVPN Configuration
server.crt: Certificate file
server.key: Private key file
dh1024.pem: Diffie-Hellman parameters file
ccd: A directory containing client-specific configuration files
Keep in mind that a certificate becomes valid once its validity time has been reached,
thus an accurate system has to be set prior to creating certificates and establishing a
tunnel connection. Please ensure that all NTP servers are reachable. Using host names
also requires a working DNS server.
Client Management
Once you have successfully set up an OpenVPN server tunnel, you can manage and
enable clients connecting to your service. Currently connected clients can be seen on
this page, including the connect time and IP address. You may kick connected clients
by disabling them.
In the Networking section you can specify a fixed tunnel endpoint address for each client
as well as the network behind it. This can be used for routing purposes.
You may also define further routes to be pushed to each client in case you want to
redirect traffic for particular networks towards the server. Routing between the clients
is generally not allowed but you can enable it if desired.
61