Wlan Configuration - NetModule NB2700 User Manual

clients and Ethernet hosts operate in the same subnet. However, for multiple SSIDs we
strongly recommend to set up separated interfaces in routing-mode in order to avoid
unwanted access and traffic between the interfaces. The corresponding DHCP server for
each network can be configured in afterwards as described in chapter 5.7.2.
Network mode: Choose whether the interface shall be operated bridged or in routing-
mode
Bridge interface: If bridged, the LAN interface to which the WLAN network should be
bridged
IP address / netmask: In routing-mode, the IP address and netmask for this WLAN
network
NB2700 User Manual
Figure 5.13.: WLAN Configuration
40