NB2700 User Manual
USB Device Server
As soon as the USB device server has been enabled you can refresh the discovered USB
devices plugged in and attach them to the USB/IP server. Enabled devices can now
be exported to a remote host. You will need an additional driver on the remote site
(a pre-packed Windows driver package can be obtained from
http://www.netmodule.
com/products) and further installation instructions which we will happily provide on
demand.
Figure 5.15.: USB Device Server
Please note, that some USB devices behave latency-sensitive which may raise problems
when run over a slow IP connection. In addition, it may also happen that the device
driver is not able to work with the USB/IP driver. Please contact our support in case
of compatibility issues.
42
Need help?
Do you have a question about the NB2700 and is the answer not in the manual?