Automatic File Configuration - NetModule NB2700 User Manual

NB2700 User Manual
Figure 5.55.: Automatic File Configuration
Time of day: Time of day when the system should check for updates
URL: The URL where the configuration file should be retrieved from (supported proto-
cols are HTTP, HTTPS, TFTP, FTP)
Factory Configuration
This menu can be used to reset the device to factory defaults. Your current configuration
will be lost. This procedure can also be initiated by pressing and holding the Reset
button for at least five seconds. A successfully initiated factory reset can be noticed by
all LEDs having been turned on. The factory reset will set the IP address of the first
Ethernet interface back to 192.168.1.1. You will be able to communicate again with
the device using the default network parameters. You may store the currently running
configuration as factory defaults which will reside active even when a factory reset has
been initiated (e.g. by your service staff).
Please ensure that this corresponds to a working configuration. A real factory reset to
the default settings can be achieved by restoring the original factory configuration and
initiating the factory reset again.
104