Ipsec Configuration - NetModule NB2700 User Manual

connection (default 30 seconds)
Failure threshold: The number of unanswered DPD requests until the IPsec peer is
considered dead (the router will then try to re-establish a dead connection auto-
matically)
IKE Authentication
NetModule routers support IKE authentication through pre-shared keys (PSK) or cer-
tificates within a public key infrastructure.
Using PSK requires the following settings:
PSK: The pre-shared key used to authenticate at the peer
Local ID Type: The type of identification for the local ID which can be a FQDN, username@FQDN
or IP address
Local ID: The local ID value
Local ID Type: The type of identification for the remote ID
Remote ID: The remote ID value
When using certificates you would need to specify the operation mode. When run as
PKI client you can create a Certificate Signing Request (CSR) in the certificates section
which needs to be submitted at your Certificate Authority and imported to the router
NB2700 User Manual
Figure 5.28.: IPsec Configuration
65