Figure 4-2 Create A New Connection - H3C SecPath F100-C Installation Manual

Installation Manual
H3C SecPath F100-C Firewall
Enter the name of the new connection and click <OK>. See Figure
4-2.

Figure 4-2 Create a new connection

Step 2: Setting the terminal parameter
Setting the HyperTerminal parameter of Windows98 as follows:
1) Select serial interface
Select the serial interface to be used from the Connect Using
drop-down list as shown in Figure 4-3. The serial interface selected
here must be the one connected to the console cable.
Chapter 4 Starting and Configuring
the H3C SecPath F100-C
4-2