H3C SecPath F100-C Installation Manual page 49

Installation Manual
H3C SecPath F100-C Firewall
Step 2: Select an appropriate download speed, for example,
115200 bps by entering 5. The following message appears:
Download speed is 115200 bps. Change the terminal's speed
to 115200 bps, and select XModem protocol. Press ENTER key
when ready.
Step 3: Change your terminal's baud rate to the same baud rate
for software downloading. After that, disconnect the terminal
([Dial-in/Disconnect]), reconnect it ([Dial-in/Dialing]), and press
<Enter> to start downloading. The system displays:
Waiting ...CCCCC
Note:
The new baud rate takes effect only after you reconnect the terminal
emulation program.
Step 4: Select [Transmit/Send file] in the terminal window. The
following dialog box pops up:
Chapter 5 Maintaining the H3C
5-5
SecPath F100-C