Upgrading The Application Programs Using Tftp - H3C SecPath F100-C Installation Manual

Installation Manual
H3C SecPath F100-C Firewall
If the operation is successful, the system displays:
Writing to Boot ROM.Please wait...######
Restoring Boot ROM program successed!
Step 3: When the Boot ROM operation menu appears again,
select 5 to exit and reboot the H3C SecPath F100-C.
5.4 Upgrading the Application Programs
Using TFTP
You can download the application program using TFTP through
the Ethernet interface. In this case, the H3C SecPath F100-C acts as
the client and must be connected to the TFTP server through one of its
fixed Ethernet interfaces. You can upgrade the application program in
these steps:
1) Start the TFTP server.
Start the TFTP server on the PC connected to the Ethernet
interface on the H3C SecPath F100-C and set the directory to the file
that is to be downloaded.
2) Configure the H3C SecPath F100-C.
Step 1: Enter the Boot menu and select 2 to enter the Net port
download menu as follows:
Net Port Download Menu:
1:
2:
3:
Enter your choice(1-3): 1
Step 2: Configure TFTP parameters.
Change Net Parameter
Download From Net
Exit to Main Menu
Chapter 5 Maintaining the H3C
5-10
SecPath F100-C