Installation Manual
H3C SecPath F100-C Firewall
LED
SYS
PWR
IV. Interface attributes
The H3C SecPath F100-C firewall provides the console port, 10
Mbps interface and 10/100 Mbps Ethernet interfaces.
1)
Console port
Table 1-3 Attributes of the console port
Item
Connector
Interface standard
Baud rate
Service
Description
Blinking: The system is operating
normally.
ON or OFF: The system is faulty.
OFF: No power is supplied.
ON: Power is being supplied.
Description
RJ-45
Asynchronous RS232
1200 bps to 115200 bps, defaults to 9600
bps
Connected to an ASCII terminal
Connected to the serial interface on a PC
running the terminal emulation software
Command line interface (CLI)
1-5
Chapter 1 Product Overview
Need help?
Do you have a question about the SecPath F100-C and is the answer not in the manual?
Questions and answers