Safety Precautions - H3C SecPath F100-C Installation Manual

Installation Manual
H3C SecPath F100-C Firewall
Enough space is left between the air inlet/exhaust vents.
The workbench has a good ventilation system.
The workbench is firm enough to support device and its
accessories.
The workbench is well earthed.

2.2 Safety Precautions

Be sure that you observe all safety precautions when you install
your H3C SecPath F100-C and pay adequate attention to the
following icons:
Caution means care should be taken in these operations
during installation and use. Improper operations might cause bodily
injury to the operators or damage the device.
Follow these safety precautions when installing or using the H3C
SecPath F100-C:
Keep the H3C SecPath F100-C away from moisture and
heat.
The H3C SecPath F100-C is well earthed.
Always wear an ESD-preventive wrist strap when installing
and maintaining the H3C SecPath F100-C, making sure the
strap has good skin-contact.
Do not plug/unplug the cable when there is power supply.
It is recommended to use uninterrupted power supply
(UPS).
Chapter 2 Preparing for Installation
2-5