H3C SecPath F100-C Installation Manual page 63

Installation Manual
H3C SecPath F100-C Firewall
II. Enabling FTP sever
Follow these steps under the direction of service engineers:
Step 1: Configure an authentication method.
Note:
You can configure AAA authentication as needed. For more
information, refer to Operation Manual and Command Manual of this
product.
Step 2: Add the username.
[VPNGateway] local-user VPNGateway
VPNGateway is the user name.
Step 3: Add the password.
[VPNGateway-luser-vpngateway] password simple 123
Step 4: Add the service type and specify the FTP directory.
[VPNGateway-luser-vpngateway] service-type ftp
ftp-directory flash:
Step 5: Add authority level.
[VPNGateway-luser-vpngateway] level 3
Step 6: Enable the FTP server.
[VPNGateway] ftp-server enable
Chapter 5 Maintaining the H3C
5-19
SecPath F100-C