D Programming Group Id - Icom IC-M504 Instruction Manual

D Programming Group ID

q Push [MENU] to enter the DSC menu.
w Rotate [DIAL] to select "Set up," push [DIAL•ENTER].
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit
e Rotate [DIAL] to select "Add:Group ID," push
[DIAL•ENTER].
--DSC Menu--
Set up
Add:INDV ID
˘Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
r Rotate [DIAL] to set the group ID and ID name.
• The group ID s a unque number that you create for your group.
The ID name s an assocated text name for that group.
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor for-
ward or backward, respectvely.
• Push [CLR] to cancel and return to the set up menu.
• "Full ID" appears when 100 DSC address IDs are already
set.
• After enterng an 8-dgt ID code, push [DIAL•ENTER] or [16•9]
to enter a 10-character ID name.
• 1st dgt '0' s fixed for a group ID.
--DSC Menu--
Add:Group ID
Input 8 digits
0________
Input name
_________
<CLR Exit / ENT OK>
t After nputtng, push [DIAL•ENTER] to program.
y Push [CLR] or rotate [DIAL] to select "Exit," push
[DIAL•ENTER].
• Returns to the DSC menu.
• Repeat agan to return to the normal operaton condton.
6
DSC OPERATION
6
19