Icom IC-M504 Instruction Manual page 9

u CHANNEL SELECTOR [DIAL•ENTER]
➥ Rotate to select the operatng channels, Set mode set-
tngs, etc. (pgs. 6–8, 55)
➥ Whle pushng and holdng [H/L], rotate to adjust the
brghtness of the LCD and key backlght. (p. 10)
➥ Push to enter the nput channel comment, selected
tem, etc. (pgs. 10, 55)
➥ Rotate to check TAG channels, changes scannng d-
recton or resumes the scan manually durng scan.
(p. 13)
➥ Whle pushng and holdng [HAIL•RX
just the audo level n RX Speaker mode. (p. 51)
➥ Push and hold for 1 sec. to dsplay the GPS nformaton
when a GPS recever s connected. (p. 22)
i CHANNEL/WEATHER CHANNEL KEY
[CH/WX•DUAL•U/I/C]
➥ Selects and toggles the regular channel and Weather
channel when pushed momentarly. (p. 7)
➥ Push and hold for 1 sec. to start Dualwatch or Tr-
watch. (p. 14)
➥ Push to stop Dualwatch or Tr-watch when ether s ac-
tvated. (p. 14)
➥ Move the cursor backward whle n the channel com-
ment programmng condton. (p. 10)
➥ Whle pushng and holdng [H/L], push to select one of
three channel groups n sequence. (p. 7)
• U.S.A., Internatonal and Canadan channels are avalable.
o SQUELCH CONTROL [SQL]
Rotate to set the squelch threshold level. (p. 8)
!0 SCAN/TAG KEY [SCAN•TAG] (p. 13)
➥ Push to start and stop Normal or Prorty scan.
➥ Push and hold for 1 sec. to set or clear the dsplayed
channel as a TAG (scanned) channel.
➥ Whle pushng and holdng [H/L], push for 3 sec. to
clear or set all TAG channels n the selected channel
group.
!1 VOLUME CONTROL [VOL] (p. 8)
], rotate to ad-
Rotate to adjust the audo level.
!2 TRANSMIT POWER KEY [H/L]
➥ Push to toggle the power hgh or low. (p. 8)
• Some channels are set to low power only.
➥ Whle pushng ths key, some keys perform secondary
functons.
!3 POWER KEY [POWER] (p. 8)
➥ Push to turn power ON.
➥ Push and hold for 1 sec. to turn power OFF.
PANEL DESCRIPTION
2
2
3